omag hydraulic press brakes EURO series mod. POL 5030
|
The press brake : POL series includes hydraulic press brakes with torsion bar having a working force of 350 and 500 kN with different bending lengths from 1550 to 4050 mm.
Frame : it is made under rolled, bolted and strengthened steel for ensuring the maximum rigidity.
Cylinders: at double acting, are made under steel, lapped and ground; shafts, further to be lapped and ground, are hardened with induction.
Working speeds : approach and upstroke speed are high in order to decrease the dead times. Slow bending speed is limited automatically as soon as the ram reachs the sheet to be bended.
Working cycles : single and automatic.
Ram : it is driven through a leverism of two cylinders placed between housings. Ram stroke is adjustable at both bottom and top dead centre.
Parallelism : parallelism accurancy is achieved by the torsion bar and the cylinder mechanic stop.
|
Model
|
Bending length
|
Bending force.
|
1550 mm.
|
350 kN
| |
2050 mm.
|
350 kN
| |
2550 mm.
|
350 kN
| |
3050 mm.
|
350 kN
| |
Model
|
Bending length
|
Bending force.
|
2050 mm.
|
500 kN
| |
2550 mm.
|
500 kN
| |
3050 mm.
|
500 kN
| |
4050 mm.
|
500 kN
|
Standard equipment
- Two rear stops with micrometrical adjustment
- Standard top tool in C60 material
- Standard bottom tool in C60 material
- Manual bending angle adjustment
- First filling oil
- Safety device according to CE rules ( for UE countries only )
|
Optional
- Manual back gauge with front read-out, mm. 700 stroke.
- Powered back gauge with front read-out , a.c. motor, mm. 700 stroke
- Powered bending angle adjustment.
- Numerical control CPC123 for X and Y axes, 300 memory steps every axis, powered bending angle adjustment and powered back gauge included , a.c. motors.
|